Dell PowerConnect 3524 User's Guide - Page 336
Defining STP LAG Settings, STP LAG Settings, Switch, Spanning Tree, Spanning Tree LAG Settings
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 336 highlights
Defining STP LAG Settings Use the STP LAG Settings page to assign STP aggregating ports parameters. To open the STP LAG Settings page, click Switch → Spanning Tree → LAG Settings in the tree view. Figure 7-38. STP LAG Settings The Spanning Tree LAG Settings page contains the following fields: • Select a LAG - The LAG number for which you want to modify STP settings. • STP - Enables or disables STP on the LAG. The possible field values are: - Enable - Indicates that STP is enabled on the LAG. - Disable - Indicates that STP is disabled on the LAG. • Fast Link - Enables Fast Link mode for the LAG. If Fast Link mode is enabled for a LAG, the LAG State is automatically placed in the Forwarding state when the LAG is up. Fast Link mode optimizes the time it takes for the STP protocol to converge. STP convergence can take 30-60 seconds in large networks. The possible values are: - Checked - Fast Link is enabled. - Unchecked - Fast Link is disabled. 336 Configuring Switch Information