Dell PowerConnect 3524 User's Guide - Page 28
The back panel contains an RPS connector, console port, and power connector. - gigabit
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
There are two buttons on the front panel. The Stack ID button is used to select the unit number. The second button is the Reset Button which is used to manually reset the device. The Reset button does not extend beyond the unit's front panel surface, so reset by pressing it accidentally is prevented. On the front panel are all the device LEDs. The following figure illustrates the PowerConnect 3524 back: Figure 2-2. PowerConnect 3524 Back Panel Console Port RPS Connector Power Connector The back panel contains an RPS connector, console port, and power connector. PowerConnect 3548 Port Description The PowerConnect 3548 device is configured with the following ports: • 48 FE ports - RJ-45 ports designated as 10/100Base-T ports • 2 Fiber ports - Designated as 1000Base-X SFP ports • 2 Gigabit ports - Designated as 1000Base-T ports • Console port - RS-232 Console based port The following figure illustrates the PowerConnect 3548 front panel. Figure 2-3. PowerConnect 3548 Front Panel 10/100 Base-T Ports 1, 3, 5, 7, ...47 System LEDs Reset Button Stacking Button Stacking LEDs 10/100 Base-T Ports 2, 4, 6, 8, ...48 G1 G2 1000Base-X SFP Ports G3 G4 Stacking Ports 28 Hardware Description