Dell PowerConnect 3524 User's Guide - Page 311

4 Check the Copy to check box to define the interfaces to which the storm control definitions are copied, or click Select All to copy the definitions to all ports. 5 Click Apply Changes. The parameters are copied to the selected ports in the Storm Control Settings Table, and the device is updated. Configuring Storm Control with CLI Commands The following table summarizes the equivalent CLI commands for configuring Storm Control as displayed on the Storm Control page. Table 7-14. Storm Control CLI Commands CLI Command Description port storm-control include-multicast Enables the device to count Multicast, Unicast, and Broadcast packets together. port storm-control broadcast enable Enables broadcast storm control. port storm-control broadcast rate Configures the maximum broadcast rate. show ports storm-control port Displays the storm control configuration. The following is an example of the CLI commands: console(config)# port storm-control include-multicast console(config)# interface ethernet 1/e1 console(config-if)# port storm-control broadcast enable console(config-if)# port storm-control broadcast rate 100000 console(config-if)# end console# show ports storm-control Port Broadcast Storm control [kbyes/sec] ----- 1/e1 8000 2/e1 Disabled 3/e2 Disabled Configuring Switch Information 311