Dell PowerConnect 3524 User's Guide - Page 112
Unit No., Receive Servers Updates, Enable, Disable, Remove, Checked, SNTP Broadcast Interface Table
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
The SNTP Broadcast Interface Table page contains the following fields: • Unit No. - Indicates the stacking member on which the SNTP interface is enabled. Interface - Contains an interface list on which SNTP can be enabled: • Receive Servers Updates - Enables or disables SNTP on the specific interface. - Enable - Enables the interface to receive updates from the SNTP server. - Disable - Interface does not receive updates from the SNTP server. • Remove - Removes SNTP from a specific interface, when selected. - Checked - Removes the SNTP interface entry. - Unchecked - Maintains the SNTP interface entry. Adding an SNTP Interface 1 Open the SNTP Broadcast Interface Table page. 2 Click Add. The Add SNTP Interface page opens. Figure 6-18. Add SNTP Interface 3 Define the relevant fields. 4 Click Apply Changes. The SNTP interface is added, and the device is updated. Defining SNTP Interface Settings Using CLI Commands The following table summarizes the equivalent CLI commands for setting fields displayed in the SNTP Broadcast Interface Table page. Table 6-12. SNTP Interface Settings CLI Commands CLI Command Description sntp client enable Enables the Simple Network Time Protocol (SNTP) client on an interface. show sntp configuration Shows the configuration of the Simple Network Time Protocol (SNTP). 112 Configuring System Information