Dell PowerConnect 3524 User's Guide - Page 40
Unpacking the Device, Installing in a Rack
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
• Rack-mount kit for rack installation or wall mounting kit • Documentation CD • Product Information Guide Unpacking the Device NOTE: Before unpacking the device, inspect the package and immediately report any evidence of damage. 1 Place the box on a clean flat surface. 2 Open the box or remove the box top. 3 Carefully remove the device from the box and place it on a secure and clean surface. 4 Remove all packing material. 5 Inspect the device and accessories for damage. Report any damage immediately. Mounting the Device The following mounting instructions apply to The PowerConnect 3524/P and PowerConnect 3548/P devices. The Console port is on the back panel. The power connectors are positioned on the back panel. Connecting a Redundant Power Supply (RPS) is optional, but is recommended. The RPS connector is on the back panel of the devices. Installing in a Rack WARNING: Read the Safety Information included in the Product Information Guide for safety information on devices connected to or that support the SWI. WARNING: Disconnect all cables from the unit before mounting the device in a rack or cabinet. WARNING: When mounting multiple devices into a rack, mount the devices from the bottom up. 40 Installing the PowerConnect 3524/P and PowerConnect 3548/P