Dell PowerConnect 3524 User's Guide - Page 194
Defining Enable Passwords, password
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Assigning Line Passwords Using CLI Commands The following table summarizes the equivalent CLI commands for setting fields displayed in the Line Password page. Table 6-39. Line Password CLI Commands CLI Command password password [encrypted] Description Indicates a password on a line. The following is an example of the CLI commands: console(config-line)# password dell Defining Enable Passwords The Enable Password page sets a local password to control access to Normal and Privilege levels. To open the Enable Password page, click System → Management Security → Enable Passwords in the tree view. Figure 6-69. Enable Password The Enable Password page contains the following fields: • Select Enable Access Level - Access level associated with the enable password. The lowest user access level is 1 and 15 is the highest user access level. Users with access level 15 are Privileged Users, and only they can access and use the OpenManage Switch Administrator. • Password (0-159 characters) - The password to enable. 194 Configuring System Information