Dell PowerConnect 3524 User's Guide - Page 207
Defining LLDP Properties, Enable LLDP, Checked, Updates Interval 5-32768, Hold Multiplier 2-10
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
Defining LLDP Properties The LLDP Properties page contains fields for configuring LLDP. To open the LLDP Properties page, click System → LLDP-MED → LLDP Properties in the tree view. Figure 6-76. LLDP Properties • Enable LLDP - Indicates if LLDP is enabled on the device. The possible field values are: - Checked - Indicates that LLDP is enabled on the device. - Unchecked - Indicates that LLDP is disabled on the device. This is the default value. • Updates Interval (5-32768) - Indicates that rate at which LLDP advertisement updates are sent. The possible field range is 5 - 32768 seconds. The default value is 30 seconds. • Hold Multiplier (2-10) - Specifies the hold time to be sent in the LLDP update packets as a multiple of the timer value. The possible field range is 2 - 10. The field default is 4. • Reinitializing Delay (1-10) - Specifies the minimum time in seconds an LLDP port will wait before reinitializing LLDP transmission. The possible field range is 1 - 10 seconds. The field default is 2 seconds. • Transmit Delay (1-8192) - Indicates the amount of time that passes between successive LLDP frame transmissions due to changes in the LLDP local systems MIB. The possible field value is 1 - 8192 seconds. The field default is 2 seconds. Configuring System Information 207