Dell PowerConnect 3524 User's Guide - Page 222
show snmp, Global Parameters
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
Enabling SNMP Notifications Using CLI Commands The following table summarizes the equivalent CLI commands for viewing fields displayed in the SNMP Global Parameters page. Table 6-46. SNMP Notification Commands CLI Command Description snmp-server enable traps Enables the router to send Simple Network Management Protocol traps snmp-server trap authentication Enables the router to send Simple Network Management Protocol traps when authentication fails show snmp Checks the status of SNMP communications. snmp-server engine ID local {engineid-string | default} Indicates the local device engine ID. The field values is a hexadecimal string. Each byte in hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a period or colon. The Engine ID must be defined before SNMPv3 is enabled. The following is an example of the CLI commands: Console(config)# snmp-server enable traps Console(config)# snmp-server trap authentication Console# show snmp Community-String Community-Access public read only View name --------view-1 IP address ---------All Community-String Group name IP address ---------- Type ---- Traps are enabled. Authentication-failure trap is enabled. 222 Configuring System Information