Dell PowerConnect 3524 User's Guide - Page 42
Installing the Device on a Wall
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Installing the Device on a Wall 1 Place the supplied wall-mounting bracket on one side of the device, ensuring that the mounting holes on the device line up to the mounting holes on the rack-mounting bracket. The following figure illustrates where to mount the brackets. Figure 3-2. Bracket Installation for Mounting on a Wall 2 Insert the supplied screws into the rack-mounting holes and tighten with a screwdriver. 3 Repeat the process for the wall-mounting bracket on the other side of the device. 4 Place the device on the wall in the location where the device is being installed. 5 On the wall mark the locations where the screws to hold the device must be prepared. 6 Drill holes and place all plugs (not provided) in the holes, in the marked location. 7 Secure the unit to the wall with screws (not provided). Ensure that the ventilation holes are not obstructed. 42 Installing the PowerConnect 3524/P and PowerConnect 3548/P