Dell PowerConnect 3524 User's Guide - Page 358
Reserve VLAN for Internal Use, Current Reserved VLAN
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 358 highlights
• Dynamic - Assigns a port to a VLAN based on the host source MAC address connected to the port. - Checked - The port may be registered in a dynamic VLAN. - Unchecked - The port is not allowed to register in a dynamic VLAN. • PVID (1-4095) - Assigns a VLAN ID to untagged packets. The possible values are 1-4095. VLAN 4095 is defined as per standard and industry practice as the Discard VLAN. Packets classified to the Discard VLAN are dropped. • Frame Type - Packet type accepted on the port. Possible values are: - Admit Tag Only - Only tagged packets are accepted on the port. - Admit All - Both tagged and untagged packets are accepted on the port. • Ingress Filtering - Ingress filtering discards packets that are destined to VLANs of which the specific port is not a member. - Enable - Ingress filtering is activated on the port. - Disable - Ingress filtering is not activated on the port. • Current Reserved VLAN - The VLAN currently designated by the system as the reserved VLAN. • Reserve VLAN for Internal Use - The VLAN selected by the user to be the reserved VLAN if not in use by the system. Assigning Port Settings 1 Open the VLAN Port Settings page. 2 Select the port to which settings need to be assigned from the Port drop-down menu. 3 Complete the remaining fields on the page 4 Click Apply Changes. The VLAN port settings are defined, and the device is updated. 358 Configuring Switch Information