Dell PowerConnect 3524 User's Guide - Page 202
Default Timeout for Reply 1-30, Default Key String 0-128 Characters
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
• Dead Time (0-2000) - Indicates the amount of time (in minutes) that a RADIUS server is bypassed for service requests. The range is 0-2000. • Key String (0-128 Characters) - The Key string used for authenticating and encrypting all RADIUS communications between the device and the RADIUS server. This key is encrypted. • Source IP Address - Indicates the source IP address that is used for communication with RADIUS servers. • Usage Type - Indicates the server usage type. Can be one of the following values: login, 802.1x or all. If unspecified, defaults to all. • Use Default - Uses the default value for the parameter. If host-specific Timeouts, Retries, or Dead time values are not specified, the Global values (Defaults) are applied to each host. The following fields set the RADIUS default values: • Default Retries (1-10) - Indicates the default number of transmitted requests sent to RADIUS server before a failure occurs. • Default Timeout for Reply (1-30) - Indicates the default amount of the time (in seconds) the device waits for an answer from the RADIUS server before timing out. The default is 5 seconds. • Default Dead time (0-2000) - Indicates the default amount of time (in minutes) that a RADIUS server is bypassed for service requests. The range is 0-2000. • Default Key String (0-128 Characters) - The Default Key string used for authenticating and encrypting all RADIUS communications between the device and the RADIUS server. This key is encrypted. • Source IPv4 Address - Specifies the source IP version 4 address that is used for communication with RADIUS servers. • Source IPv6 Address - Specifies the source IP version 6 address that is used for communication with RADIUS servers. When adding a new RADIUS server, the following additional parameter is available: • Supported IP Format - Specifies the IP format supported by the server. The possible values are: - IPv6 Global - IP version 6 is supported. - IPv4 - IP version 4 is supported. Defining RADIUS Parameters: 1 Open the RADIUS Settings page. 2 Define the fields. 3 Click Apply Changes. The RADIUS setting are updated to the device. 202 Configuring System Information