Dell PowerConnect 3524 User's Guide - Page 107

Deleting the Authentication Key 1 Open the SNTP Authentication page. 2 Click Show All. The Authentication Key Table opens. 3 Select an Authentication Key Table entry. 4 Select the Remove check box. 5 Click Apply Changes. The entry is removed, and the device is updated. Defining SNTP Authentication Settings Using CLI Commands The following table summarizes the equivalent CLI commands for setting fields displayed in the SNTP Authentication page. Table 6-10. SNTP Authentication CLI Commands CLI Command Description sntp authenticate Defines authentication for received Simple Network Time Protocol (SNTP) traffic from servers. sntp trusted key Authenticates the identity of a system to which SNTP will synchronize. sntp authentication-key number Defines an authentication key for SNTP. md5 value The following is an example of the CLI commands: console(config)# sntp authentication-key 8 md5 Calked console(config)# sntp trusted-key 8 Console(config)# sntp authenticate Defining SNTP Servers You can enable SNTP servers, as well as add new SNTP servers, from the SNTP Servers page. To open the SNTP Servers page, click System → SNTP → Servers in the tree view. Configuring System Information 107