Dell PowerConnect 3524 User's Guide - Page 395

Managing Bridge Multicast Forward All Switch/Port Control Settings Table The following table describes the controls used to set the port controls. Table 7-41. Bridge Multicast Forward All Switch/Port Control Settings Table Port Control D S F Blank Definition Attaches the port to the Multicast router or switch as a dynamic port. Attaches the port to the Multicast router or switch as a static port. Forbidden. The port is not attached to a Multicast router or switch. Attaching a Port to a Multicast Router or Switch 1 Open Bridge Multicast Forward All page. 2 Define the VLAN ID field. 3 Select a port in the Ports table, and assign the port a value. 4 Click Apply Changes. The port is attached to the Multicast router or switch. Attaching a LAG to a Multicast Router or Switch 1 Open Bridge Multicast Forward All page. 2 Define the VLAN ID field. 3 Select a port in the LAGs table, and assign the LAG a value. 4 Click Apply Changes. The LAG is attached to the Multicast router or switch. Managing LAGs and Ports Attached to Multicast Routers Using CLI Commands The following table summarizes the equivalent CLI commands for managing LAGs and ports attached to Multicast routers as displayed on the Bridge Multicast Forward All page. Table 7-42. CLI Commands for Managing LAGs and Ports Attached to Multicast Routers CLI Command Description show bridge multicast filtering vlan-id Displays the Multicast filtering configuration. bridge multicast forward-all {add | remove} Enables forwarding of all Multicast packets on a port. Use the {ethernet interface-list | port-channel port- no form of this command to return to default. channel-number-list} Configuring Switch Information 395