Epson 710C User Manual - Page 100
button to select, sets your image as the screen displayed when the projector
UPC - 010343821538
View all Epson 710C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Saving the logo may take a few moments. Do not use the projector or other sources (computer, video, speaker, etc.) while the logo is being saved. 9. When you see the message "Saving the user logo is completed," press the Menu or Enter button to redisplay the main menu. note You can also set up your image as a startup screen. Use the Advanced menu to enable the startup screen. Assigning the Image to the No-Signal Message and/or A/V Mute Button After your image is saved, you can set it up as the no-signal message and/or the screen that's displayed when you press the A/V Mute button. 1. Press the Menu button. You see the main menu listing, with the Video menu highlighted. 2. Press the bottom edge of the Enter button (or tilt it down) to highlight the Setting menu. 3. Press the Enter button to select the Setting menu. 4. Press the bottom edge of the Enter button (or tilt it down) to highlight No-Signal Msg. 5. Press the right side of the Enter button to select Logo. This sets your image as the screen displayed when the projector is not receiving a signal. 6. If you want to set up your image as the A/V mute display, press the bottom edge of the Enter button (or tilt it down) to highlight A/V Mute. 7. Press the right side of the Enter button to select Logo. This sets your image as the screen displayed when you press the AV/Mute button. 8. When you're finished, press Esc or Menu. To test your setting, press the A/V Mute button to display your image. Press it again to turn off the image. Fine-Tuning Your Projector 57