Epson 710C User Manual - Page 104

Cleaning the Air Filter

Get Epson 710C - PowerLite UXGA LCD Projector PDF manuals and user guides
UPC - 010343821538
View all Epson 710C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 104 highlights

note When you get a replacement lamp for your projector, a new air filter is included. You should replace the filter when you replace the lamp. Cleaning the Air Filter Clean the air filter after every 100 hours of use, or if the temperature warning light on top of the projector turns red. If the filter is not cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. Follow these steps to clean the filter: 1. Turn off the projector and unplug the power cord. 2. Pull up on the filter cover tab to release the cover. You may need to use a small screwdriver to pry it off. 3. Remove the cover. temperature warning light The filter is attached to the inside of the cover. 4. To clean the filter, EPSON recommends using a small vacuum cleaner designed for computers and other office equipment. If you don't have one, use a dry, lint-free cloth. 5. If the dirt is difficult to remove or if the filter is torn, replace it. Contact your dealer to obtain a new filter. 6. Snap the filter cover back into place when you're done. Maintaining and Transporting the Projector 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Maintaining and Transporting the Projector
61
Cleaning the Air Filter
Clean the air filter after every 100 hours of use, or if the
temperature warning light on top of the projector turns red.
If the filter is not cleaned periodically, it can become clogged
with dust, preventing proper ventilation. This can cause
overheating and damage the projector. Follow these steps to
clean the filter:
1.
Turn off the projector and unplug the power cord.
2.
Pull up on the filter cover tab to release the cover. You may
need to use a small screwdriver to pry it off.
3.
Remove the cover.
The filter is attached to the inside of the cover.
4.
To clean the filter, EPSON recommends using a small
vacuum cleaner designed for computers and other office
equipment. If you don’t have one, use a dry, lint-free cloth.
5.
If the dirt is difficult to remove or if the filter is torn,
replace it. Contact your dealer to obtain a new filter.
6.
Snap the filter cover back into place when you’re done.
note
When you get a
replacement lamp for your
projector, a new air filter is
included. You should
replace the filter when you
replace the lamp.
temperature
warning light