Epson 710C User Manual - Page 64

Connecting to External Speakers or a PA System

Get Epson 710C - PowerLite UXGA LCD Projector PDF manuals and user guides
UPC - 010343821538
View all Epson 710C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

note The internal speaker is disabled when you use an external audio system. Connecting to External Speakers or a PA System The projector's internal speaker is loud enough for most smallor medium-size rooms. For large rooms or maximum volume, you can connect the projector to external speakers or a public address (PA) system. You will need an RCA-to-3.5 mm stereo audio cable, which may be included with your sound system, or may be purchased from an electronics store. Before you start, make sure the projector and speakers or PA system are turned off. 1. Connect the cable's 3.5 mm stereo miniplug to the projector's Audio Out jack. Audio Out jack stereo audio cable 2. Connect the RCA plugs to the speaker or PA system. Insert the cable's red plug into the Audio R jack, and the white plug into the Audio L jack. Getting Started 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Getting Started
21
Connecting to External Speakers or a
PA System
The projector’s internal speaker is loud enough for most small-
or medium-size rooms. For large rooms or maximum volume,
you can connect the projector to external speakers or a public
address (PA) system.
You will need an RCA-to-3.5 mm stereo audio cable, which
may be included with your sound system, or may be purchased
from an electronics store.
Before you start, make sure the projector and speakers or PA
system are turned off.
1.
Connect the cable’s 3.5 mm stereo miniplug to the
projector’s
Audio Out
jack.
2.
Connect the RCA plugs to the speaker or PA system. Insert
the cable’s red plug into the Audio R jack, and the white
plug into the Audio L jack.
note
The internal speaker is
disabled when you use an
external audio system.
Audio Out jack
stereo audio cable