Epson 710C User Manual - Page 105
Replacing the Lamp - lamp unit
UPC - 010343821538
View all Epson 710C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
warning Let the lamp cool before replacing it. To avoid premature lamp failure, do not touch the glass portion of the lamp assembly. Replacing the Lamp The projection lamp typically lasts for about 2000 hours of use. It is time to replace the lamp when you see the following: s The projected image gets darker or starts to deteriorate. s The lamp warning light on top of the projector is either red or flashing orange. s The message LAMP REPLACE appears on the screen when the projector lamp comes on. This happens after about 2000 hours of use. To maintain projector brightness and image quality, replace the lamp as soon as possible after you see the message. Contact your dealer or call EPSON Accessories at (800) 873-7766 in the United States and Canada for a replacement lamp. Use the following part number when you order a lamp: s ELPLP10B (PowerLite 700c/500c) s ELPLP10S (PowerLite 710c) Follow these steps to replace the lamp: 1. Turn off the projector and allow it to cool, then unplug the power cord. 2. Before removing the lamp, wait approximately one hour until the projector is fully cooled down. 3. Turn the projector upside-down to access the lamp compartment. 62 Maintaining and Transporting the Projector