Epson 710C User Manual - Page 109
power light is flashing orange and you can't, turn on the projector., power light doesn't come on.
UPC - 010343821538
View all Epson 710C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Projector Status and Warning Lights Light Status orange flashing green Description and action The projector is in sleep mode. You can unplug it or press the Power button to turn it on. The projector is warming up. Wait for the image to appear. green The projector is operating normally. flashing orange red red flashing orange flashing red flashing orange The projector is cooling down. You can't turn the projector on or unplug it when the light is flashing. Power is cut off because of an internal problem. Contact EPSON for help. The lamp is almost burned out. This is a good time to replace it. See Chapter 4 for instructions. The lamp is burned out. Replace the lamp, following the instructions in Chapter 4. There is a problem with the lamp, power supply, fuse, or circuit. Contact EPSON for help. The projector is too hot. Turn it off and let it cool before using it. red flashing red The projector has turned off automatically because it has overheated. Let it cool for a few minutes, then turn it back on. Make sure nothing is blocking the vents on the front and top of the projector. If it continues to overheat, you may need to change the air filter. See Chapter 4 for instructions. There is a problem with the cooling fan or temperature sensor. Contact EPSON for help. The power light is flashing orange and you can't turn on the projector. The lamp is cooling down. Wait until the light stops flashing and then press the Power button to turn on the projector. The power light doesn't come on. Press the Power button to turn off the projector, check that the power cable is connected securely at both ends, then press the Power button again to turn the projector on. 66 Solving Problems