Epson 710C User Manual - Page 110
Problems with the Remote Control, temperature warning light is red.
UPC - 010343821538
View all Epson 710C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
warning Except as specifically explained in this User's Guide, do not attempt to service this product yourself. Projected images get darker or start to deteriorate, or the lamp warning light is red or flashing orange. Replace the lamp as described on page 62. The temperature warning light is red. s The projector is overheating, which turns the lamp off automatically. Let it cool for a few minutes, then press the Power button to turn it back on. Make sure nothing is blocking the vents on the top and front of the projector. s The air filter may be clogged or dirty. Clean it as described on page 61 and then let the projector cool before using it. If the projector continues to overheat after you clean the air filter, the problem may be caused by damage to the cooling fan or internal circuits. Contact EPSON for help. The temperature warning light is flashing orange. The projector is too hot. Press the Power button to turn it off and let it cool for 5 minutes before using it. Problems with the Remote Control Freeze A/V Mute E-Zoom Power R/C ON OFF 3 2 5 4 1 Enter Esc ON/OFF switch The projector doesn't respond to remote control commands. s Make sure the remote control is turned on. s The remote control batteries may be low on power. Replace them following the instructions on page 9. s Dim the room lights and turn off any fluorescents. Make sure the projector is not in direct sunlight. Strong lighting, especially fluorescent lights, may affect the projector's infrared receivers. s Turn off any nearby equipment that emits infrared energy, such as a radiant room heater. s Make sure you are within 30 feet of the projector. Solving Problems 67