Epson 710C User Manual - Page 65
The power light on top of the projector turns orange. This, turned on.
UPC - 010343821538
View all Epson 710C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
note You can connect a Kensington anti-theft device (available from computer stores) to the port on the side of the projector. Turning the Projector On and Off After you have connected your computer and other equipment, you can plug in the projector and turn it on. 1. Connect the power cord to your projector's power inlet. power light Kensington lock port 2. Plug the other end of the cord into a grounded electrical outlet. The power light on top of the projector turns orange. This indicates that the projector is receiving power, but is not yet turned on. 3. Use the tab on the lens ring to rotate the ring and pop out the lens. tab 22 Getting Started
22
Getting Started
Turning the Projector On and Off
After you have connected your computer and other equipment,
you can plug in the projector and turn it on.
1.
Connect the power cord to your projector’s power inlet.
2.
Plug the other end of the cord into a grounded electrical
outlet.
The power light on top of the projector turns orange. This
indicates that the projector is receiving power, but is not yet
turned on.
3.
Use the tab on the lens ring to rotate the ring and pop out
the lens.
note
You can connect a
Kensington anti-theft device
(available from computer
stores) to the port on the side
of the projector.
power light
Kensington
lock port
tab