Epson FX-2180 User Manual - Page 157
The printout has extra blank lines between lines of text., The printer prints strange symbols
View all Epson FX-2180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
The printout has extra blank lines between lines of text. Cause What to do Two line feed commands are being sent at the end of each line of text. Turn off the auto line feed setting using the printer's default-setting mode or the EPSON Remote! utility. See "About Your Printer's Default Settings" in Chapter 5, or "Using the EPSON Remote! Utility" in Chapter 4. The line space setting in your Adjust the line space setting in your application software is application software. incorrect. The skip-over-perforation setting is on. Turn off the skip-over-perforation setting in the default-setting mode or the EPSON Remote! utility. See "About Your Printer's Default Settings" in Chapter 5, or "Using the EPSON Remote! Utility" in Chapter 4. The printer prints strange symbols, incorrect fonts, or other inappropriate characters. Cause Your printer and computer are not communicating correctly. What to do Make sure that you are using the correct interface cable and that the communications protocol is correct. See page A-3 and your computer documentation. If you installed an optional serial interface card, also see page A-18. The wrong character table is selected in your software. Select the correct character table using your software, the default-setting mode, or the EPSON Remote! utility. The character table setting in your software overrides settings made in the default-setting mode or EPSON Remote!. 7-14 Troubleshooting