Epson FX-2180 User Manual - Page 95
Loading envelopes, Tear Off/Bin, Off/Bin
View all Epson FX-2180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Loading envelopes You can load envelopes only in the top paper slot as described in "Loading Single Sheets in the Top Paper Slot" on page 3-8. Also, follow these guidelines: T Load envelopes one at a time in the top slot, with the flap edge first and the flap side up. flap side up, printable side down T Set the paper thickness lever (located under the printer cover) to position 4 or 5. T Before printing, turn on the card mode by pressing the Tear Off/Bin button until both Tear Off/Bin lights are on. After you finish printing on envelopes, press the Tear Off/Bin button once to exit the card mode. (Bin 1 is selected.) T Do not use envelopes that are curled or folded. Also avoid using envelopes that are too thin; they may curl during printing and become jammed. T If you use No. 6 envelopes, align the left edge of the envelope with the arrow mark on the printer. T Use envelopes only under normal temperature and humidity conditions, as follows: Temperature 15 to 25°C (59 to 77°F) Humidity 30 to 60% RH 3-6 Printing on Single Sheets