Epson FX-2180 User Manual - Page 79
Never use the knob to remove slack in the paper or
View all Epson FX-2180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
5. Attach the paper to the pull tractor's sprockets as described in "Loading paper onto the pull tractor" on page 2-24. 6. Set the paper release lever to the pull tractor position. Then remove any slack in the paper between the push and pull tractors using the micro adjust feature (described on page 2-37) if necessary. 7. Move the paper release lever back to the push tractor position you set in step 2. 8. Adjust the top-of-form position (the position where the printer will start printing) using the micro adjust feature as described in "Adjusting the Top-of-Form Position" on page 2-37. The printer will start printing at the current position without advancing the paper. c Caution T Never use the knob to remove slack in the paper or to adjust the top-of-form position; this may damage the printer or cause it to lose the top-of-form position. T Always remove any slack from the paper; otherwise print quality may be reduced. 9. Attach the paper guide. Then slide the edge guides to the middle of the paper guide. 10. Attach the printer cover and close the paper guide cover. Note: Always close the printer cover before printing. The printer does not print when the cover is open. 2-32 Printing on Continuous Paper