Epson Stylus Pro 3880 Designer Edition User's Guide - Page 42
to save the setting., Enter. Choose a lower value if
View all Epson Stylus Pro 3880 Designer Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
42 | Handling Paper and Other Media 9. Make sure the paper you are creating the configuration for is loaded in the correct paper path in the printer. Then press r and Enter to print a paper thickness pattern. The printer prints a pattern similar to the following: Smallest gap 10. Examine the printed pattern for the most evenly overlapping lines, and choose that pattern number. (In the example shown above, the lines of pattern 4 are the most even.) 11. After printing the pattern, THICKNESS NUMBER is displayed. Press d or u to select the number that you noted in step 7. Then press Enter to save the setting. 12. Press l and then d to select PAPER FEED ADJUST A, then press r. Adjusting this setting and the PAPER FEED ADJUST B can help eliminate banding. 13. Press u or d to set the paper feed amount for the printable area (labelled A in the illustration), and then press Enter. Choose a lower value if you see white lines on your prints, or a higher value if you see dark lines. 14. Press l and then d to select PAPER FEED ADJUST B, then press r. 2-42