Epson Stylus Pro 3880 Designer Edition User's Guide - Page 67
wait up to 5 seconds after each pass to allow ink to dry on
View all Epson Stylus Pro 3880 Designer Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Printing with Epson Drivers for Macintosh | 67 • Off (No Color Adjustment) to disable color management in the printer driver. Choose this setting when you use a color-managed workflow in Photoshop or other software applications. 3. If you are using non-Epson media and you need to fine-tune its performance, select Paper Configuration from the pop-up menu. You see a window like this one: Note: You may need to change the Color Density setting if your custom color profile was created to optimize D-max and color gamut. 4. Select the correct settings to match your ICC profile. These settings override any paper configuration settings you may have made using the printer's control panel. • Color Density lets you control the ink saturation level (for example, when you turn off color management in your printer software). • Drying Time per Print Head Pass lets you print with non-Epson media and avoid smearing the ink. You can make the print head wait up to 5 seconds after each pass to allow ink to dry on the page. • Paper Feed Adjustment helps reduce banding. Choose a lower value if you see white lines on your prints, or a higher value if you see dark lines. • Paper Thickness helps reduce vertical banding and creates a sharper image when printing on unusually thick or thin paper. • Platen Gap lets you fine-tune the setting for unusually thick or thin paper. 3-67