HP 4300 Service Manual - Page 65
PCL sub-submenu (a submenu in the printing submenu), Table 22. PCL submenu, Values, Explanation - laserjet 4200 printer driver
UPC - 808736312264
View all HP 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Table 21. Printing submenu (continued) Item Values Explanation OVERRIDE A4/ *NO LETTER YES Use this item to instruct the printer to print an A4-size job on letter-size media if A4-size paper is not loaded in the printer (or vice versa). MANUAL FEED *OFF ON Use this item to instruct the printer to feed the media manually from tray 1, rather than automatically from a tray. If MANUAL FEED=ON and tray 1 is empty, the printer goes offline when it receives a print job. MANUALLY FEED [PAPER SIZE] appears on the printer control-panel display. COURIER FONT *REGULAR DARK Specify the version of Courier font to use: REGULAR: The internal Courier font available on the HP LaserJet 4 series printers. DARK: The internal Courier font available on the HP LaserJet 4200/4300 series printers. WIDE A4 *NO YES Changes the number of characters that can be printed on a single line of A4-size paper. NO: Up to 78 10-pitch characters can be printed on one line. YES: Up to 80 10-pitch characters can be printed on one line. PRINT PS ERRORS *OFF ON Use this item to tell the printer whether or not to print a postscript (PS; an object orientated computer language used to describe the layout of documents to be printed) error page prints. OFF: PS error page never prints. ON: PS error page prints when PS errors occur. PCL sub-submenu (a submenu in the printing submenu) The following section lists the settings and their possible values in the PCL submenu. The default value for each setting is the one that has an asterisk (*) next to it. Table 22. PCL submenu Item Values Explanation FORM LENGTH 5 to 128 (*60) Use this item to set vertical spacing from 5 to 128 lines for the default paper size. ORIENTATION *PORTRAIT LANDSCAPE Use this item to select default page orientation. Note It is best to set the page orientation in the software program or printer driver. (Program and printer-driver settings override control-panel settings.) FONT SOURCE *INTERNAL SOFT SLOT 1, 2, or 3 INTERNAL: Internal fonts. SOFT: Permanent soft fonts. This option is available only if it is installed. SLOT 1, 2, or 3: Fonts stored in one of the three DIMM slots. This option is available only if it is installed. FONT NUMBER *0 to 999 The printer assigns a number to each font and lists the numbers on the PCL Font List. The font number appears in the Font # column of the printout. FONT PITCH 0.44 to 99.99 (*10.00) Use this item to select the font pitch. This item might not appear, depending on the selected font. Q2431-90912 Chapter 3 Printer operation 45