HP 4300 Service Manual - Page 70

Table 24. System setup submenu (continued) Item Values Explanation CLEARABLE WARNINGS *JOB ON The amount of time that a clearable warning is shown on the printer control-panel display. JOB: The clearable warning message appears until the end of the job that generated the message. ON: The clearable warning message appears until you press the SELECT ( ) button. AUTO CONTINUE OFF *ON Use this item to tell the printer how to react to errors. If the printer is on a network, you probably want to turn AUTO CONTINUE to ON. ON: If an error occurs that prevents printing, the message appears on the printer control-panel display, and the printer goes offline for 10 seconds before returning online. OFF: If an error occurs that prevents printing, the message remains on the printer control panel display, and the printer remains offline until you press the SELECT ( ) button. CARTRIDGE LOW STOP *CONTINUE Use this item to tell the printer how to behave if the print cartridge is low. The ORDER CARTRIDGE message first appears when about 15 percent of the toner remains in the print cartridge when printing at 5 percent coverage. (For the 12,000-page cartridge in the LaserJet 4200 series, 15 percent means that about 1,800 pages remain. For the 18,000-page cartridge in the LaserJet 4300 series, 15 percent means that about 2,700 pages remain.) Good print quality is not guaranteed if you print after receiving this message. STOP: The printer pauses printing until you replace the print cartridge. If you do not replace the cartridge, you must press the SELECT ( ) button before each job to print that job. The message appears until you replace the print cartridge. CONTINUE: The printer continues to print, but the message continues to appear until you replace the print cartridge. CARTRIDGE OUT STOP *CONTINUE Use this item to tell the printer how to act if the print cartridge is empty. STOP: The printer stops printing until you replace the print cartridge. CONTINUE: The printer continues to print, and the REPLACE CARTRIDGE message continues to appear until you replace the print cartridge. HP does not guarantee good print quality if you select CONTINUE after a REPLACE CARTRIDGE condition. Replace the print cartridge as soon as possible to ensure good print quality. JAM RECOVERY OFF ON *AUTO Use this item to tell the printer how to behave if a jam occurs. OFF: The printer does not reprint pages following a jam. Printing performance might be improved with this setting. ON: The printer automatically reprints pages after a jam is cleared. AUTO: The printer automatically selects the best mode for printer jam recovery (usually ON). 50 Printer operation Q2431-90912