HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 10
display igmp-snooping router-port, Examples, Related commands, Syntax, Views, Predefined user roles
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
verbose: Displays detailed information. slot slot-number: Specifies a member device by its member ID. The slot-number argument specifies an IRF member device ID. If no member device is specified, this command displays information about the dynamic IGMP snooping forwarding entries on the master device in the IRF fabric. Examples # Display information about the dynamic IGMP snooping forwarding entries in VLAN 2. display igmp-snooping group vlan 2 Total 1 entries. VLAN 2: Total 1 entries. (0.0.0.0, 224.1.1.1) Host slots (0 in total): Host ports (1 in total): XGE1/1/6 (00:03:23) Table 2 Command output Field Total 1 entries VLAN 2: Total 1 entries (0.0.0.0, 224.1.1.1) Host ports (1 in total) (00:03:23) Description Total number of dynamic IGMP snooping forwarding entries. Total number of dynamic IGMP snooping forwarding entries in VLAN 2. (S, G) entry, where "0.0.0.0" represents any multicast source. Total number of member ports and the port list. Remaining time of the aging timer for the dynamic member port. On IRF devices, to display the remaining time for a non-aggregate interface on a member device that is not the master device in the IRF fabric, you must specify the slot slot-number option. For an aggregate interface, you do not need to do this. Related commands reset igmp-snooping group display igmp-snooping router-port Use display igmp-snooping router-port to display information about dynamic router ports. Syntax display igmp-snooping router-port [ vlan vlan-id ] [ slot slot-number ] Views Any view Predefined user roles network-admin network-operator Parameters vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. 3