HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 86
pim hello-option override-interval
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Examples # Enable the neighbor tracking function on VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] pim hello-option neighbor-tracking # Disable the neighbor tracking function on VLAN-interface 100 when the neighbor tracking function is enabled globally. system-view [Sysname] pim [Sysname-pim] hello-option neighbor-tracking [Sysname-pim] quit [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] pim hello-option neighbor-tracking disable Related commands hello-option neighbor-tracking (PIM view) pim hello-option override-interval Use pim hello-option override-interval to set the override interval on an interface. Use undo pim hello-option override-interval to restore the default. Syntax pim hello-option override-interval interval undo pim hello-option override-interval Default The override interval is 2500 milliseconds. Views Interface view Predefined user roles network-admin Parameters interval: Sets the override interval (in milliseconds), in the range of 1 to 65535. Usage guidelines You can set the override interval in PIM view or interface view. The configurations made in PIM view are effective on all interfaces, and the configurations made in interface view are effective on only the current interface. If you set the override interval in both PIM view and interface view, the configuration in interface view always takes precedence. Examples # Set the override interval to 2000 milliseconds on VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] pim hello-option override-interval 2000 80