HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 47
multicast load-splitting, multicast longest-match, Examples, Related commands, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Examples # Configure VLAN-interface 100 as the forwarding boundary of multicast groups in the range of 239.2.0.0/16. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] multicast boundary 239.2.0.0 16 Related commands display multicast boundary multicast load-splitting Use multicast load-splitting to enable load splitting of multicast traffic. Use undo multicast load-splitting to restore the default. Syntax multicast load-splitting { source | source-group } undo multicast load-splitting Default Load splitting of multicast traffic is disabled. Views System view Predefined user roles network-admin Parameters source: Specifies load splitting on a per-source basis. source-group: Specifies load splitting both on a per-source basis and on a per-group basis. Examples # Enable load splitting of multicast traffic on a per-source basis. system-view [Sysname] multicast load-splitting source multicast longest-match Use multicast longest-match to configure the device to select the RPF route based on the longest prefix match principle. Use undo multicast longest-match to restore the default. Syntax multicast longest-match undo multicast longest-match Default The device selects the route with the highest priority as the RPF route. 40