HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 123

mld-snooping static-group

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 123 highlights

Default IPv6 multicast source port filtering is disabled, and the port can connect to both IPv6 multicast sources and IPv6 multicast receivers. Views Ethernet interface view Predefined user roles network-admin Usage guidelines This configuration is only effective on the current port, and has the same configuration priority as the global configuration. Examples # Enable source port filtering for IPv6 multicast data on Ten-GigabitEthernet 1/1/5. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] mld-snooping source-deny Related commands source-deny (MLD-snooping view) mld-snooping static-group Use mld-snooping static-group to configure a port as a static member port of the specified IPv6 multicast group or the specified IPv6 multicast source and group. Use undo mld-snooping static-group to restore the default. Syntax mld-snooping static-group ipv6-group-address [ source-ip ipv6-source-address ] vlan vlan-id undo mld-snooping static-group ipv6-group-address [ source-ip ipv6-source-address ] { all | vlan vlan-id } Default A port is not a static member port of any IPv6 multicast group or IPv6 multicast source and group. Views Ethernet interface view, aggregate interface view Predefined user roles network-admin Parameters ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. The value can be 0::0 or in the range of FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y" represent any hexadecimal number from 0 to F. ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. all: Specifies all VLANs. vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. 117

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
117
Default
IPv6 multicast source port filtering is disabled, and the port can connect to both IPv6 multicast sources
and IPv6 multicast receivers.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
This configuration is only effective on the current port, and has the same configuration priority as the
global configuration.
Examples
# Enable source port filtering for IPv6 multicast data on Ten-GigabitEthernet 1/1/5.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] mld-snooping source-deny
Related commands
source-deny
(MLD-snooping view)
mld-snooping static-group
Use
mld-snooping static-group
to configure a port as a static member port of the specified IPv6 multicast
group or the specified IPv6 multicast source and group.
Use
undo mld-snooping static-group
to restore the default.
Syntax
mld-snooping
static-group
ipv6-group-address
[
source-ip
ipv6-source-address
]
vlan
vlan-id
undo mld-snooping static-group
ipv6-group-address
[
source-ip
ipv6-source-address
] {
all
|
vlan
vlan-id
}
Default
A port is not a static member port of any IPv6 multicast group or IPv6 multicast source and group.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Parameters
ipv6-group-address
: Specifies an IPv6 multicast group by its IPv6 address. The value can be 0::0 or in the
range of FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y"
represent any hexadecimal number from 0 to F.
ipv6-source-address
: Specifies an IPv6 multicast source by its IPv6 address.
all
: Specifies all VLANs.
vlan
vlan-id
: Specifies a VLAN. The value range for the
vlan-id
argument is 1 to 4094.