HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 84
pim hello-option lan-delay
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Use undo pim hello-option holdtime to restore the default. Syntax pim hello-option holdtime time undo pim hello-option holdtime Default The PIM neighbor lifetime is 105 seconds. Views Interface view Predefined user roles network-admin Parameters time: Sets the PIM neighbor lifetime (in seconds), in the range of 1 to 65535. A value of 65535 means that the PIM neighbor is always reachable. Usage guidelines You can set the PIM neighbor lifetime in PIM view or interface view. The configurations made in PIM view are effective on all interfaces, and the configurations made in interface view are effective on only the current interface. If you set the PIM neighbor lifetime in both PIM view and interface view, the configuration in interface view always takes precedence. Examples # Sets the PIM neighbor lifetime to 120 seconds on VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] pim hello-option holdtime 120 Related commands hello-option holdtime (PIM view) pim hello-option lan-delay Use pim hello-option lan-delay to set the prune delay on an interface. Use undo pim hello-option lan-delay to restore the default. Syntax pim hello-option lan-delay delay undo pim hello-option lan-delay Default The prune delay is 500 milliseconds. Views Interface view Predefined user roles network-admin 78