HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 162
Specifies IPv6 PIM-SM.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Parameters ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the range of FFxy::/16, where x and y represent any hexadecimal number between 0 and F, inclusive. If you do not specify an IPv6 multicast group, this command displays IPv6 PIM routing entries for all IPv6 multicast groups. ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. prefix-length: Specifies the address prefix length. The default value is 128. For an IPv6 multicast group address, the value of this argument is in the range of 8 to 128. For an IPv6 multicast source address, the value of this argument is in the range of 0 to 128. flags flag-value: Specifies a flag. If you do not specify a flag, this command displays IPv6 PIM routing entries that contain any flags. The following lists the values of the flag-value argument and their meanings: • act: Specifies IPv6 PIM routing entries that have been used for routing data. • del: Specifies IPv6 PIM routing entries to be deleted. • exprune: Specifies IPv6 PIM routing entries containing outgoing interfaces pruned by other IPv6 multicast routing protocols. • ext: Specifies IPv6 PIM routing entries containing outgoing interfaces provided by other multicast routing protocols. • loc: Specifies IPv6 PIM routing entries on the devices that reside on the same subnet as the IPv6 multicast source. • niif: Specifies IPv6 PIM routing entries containing unknown incoming interfaces. • nonbr: Specifies IPv6 PIM routing entries with IPv6 PIM neighbor lookup failure. • rpt: Specifies IPv6 PIM routing entries on the RPT branches where (S, G) prunes have been sent to the RP. • spt: Specifies IPv6 PIM routing entries on the SPT. • swt: Specifies IPv6 PIM routing entries in the process of RPT-to-SPT switchover. • wc: Specifies IPv6 PIM routing entries with wildcards. fsm: Displays detailed information about the finite state machine. incoming-interface interface-type interface-number: Specifies an incoming interface. If you do not specify an incoming interface, this command displays IPv6 PIM routing entries that contain any incoming interfaces. interface-type interface-number: Specifies an interface by its type and number. mode mode-type: Specifies an IPv6 PIM mode. If you do not specify an IPv6 PIM mode, this command displays IPv6 PIM routing entries in all modes. The available IPv6 PIM modes include: • dm: Specifies IPv6 PIM-DM. • sm: Specifies IPv6 PIM-SM. outgoing-interface { exclude | include | match } interface-type interface-number: Specifies an outgoing interface. If you do not specify an outgoing interface, this command displays IPv6 PIM routing entries containing any outgoing interfaces. Whether a specified outgoing interface is contained in the IPv6 PIM routing table depends on the following conditions: • If you specify an excluded interface, this command displays IPv6 PIM routing entries that do not contain the specified outgoing interface. 156