HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 105
display mld-snooping router-port, Examples, Related commands, Syntax, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If no multicast source is specified, this command displays information about the dynamic MLD snooping forwarding entries for all IPv6 multicast sources. vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. If no VLAN is specified, this command displays information about the dynamic MLD snooping forwarding entries for all VLANs. verbose: Displays detailed information. slot slot-number: Specifies a member device by its member ID. The slot-number argument represents the member ID of a device in the IRF fabric. If no member device is specified, this command displays information about the dynamic MLD snooping forwarding entries on the master device in the IRF fabric. Examples # Display information about the dynamic MLD snooping forwarding entries in VLAN 2. display mld-snooping group vlan 2 Total 1 entries. VLAN 2: Total 1 entries. (::,FF1E::101) Host slots (0 in total): Host ports (1 in total): XGE1/1/6 (00:03:23) Table 29 Command output Field Total 1 entries VLAN 2: Total 1 entries (::, FF1E::101) Host ports (1 in total) (00:03:23) Description Total number of dynamic MLD snooping forwarding entries. Total number of dynamic MLD snooping forwarding entries in VLAN. (S, G) entry, where "::" represents any IPv6 multicast source. Total number of member ports and the port list. Remaining time of the aging timer for the dynamic member port. On IRF devices, to display the remaining time for a non-aggregate interface on a member device that is not the master device in the IRF fabric, you must specify the slot slot-number option. For an aggregate interface, you do not need to do this. Related commands reset mld-snooping group display mld-snooping router-port Use display mld-snooping router-port to display information about dynamic router ports. Syntax display mld-snooping router-port [ vlan vlan-id ] [ slot slot-number ] Views Any view 99