HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 53
display igmp interface
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
display igmp interface Use display igmp interface to display IGMP information on an interface. Syntax display igmp interface [ interface-type interface-number ] [ verbose ] Views Any view Predefined user roles network-admin network-operator Parameters interface-type interface-number: Specifies an interface by its type and number. If no interface is specified, this command displays IGMP information on all IGMP-enabled interfaces. verbose: Displays detailed IGMP information. Examples # Display detailed IGMP information on VLAN-interface 1. display igmp interface vlan-interface 1 verbose Vlan-interface1(10.10.1.20): IGMP is enabled. IGMP version: 2 Query interval for IGMP: 125s Other querier present time for IGMP: 255s Maximum query response time for IGMP: 10s Last member query interval: 1s Startup query interval: 31s Startup query count: 2 General query timer expiry (hh:mm:ss): 00:00:54 Querier for IGMP: 10.10.1.20 (This router) IGMP activity: 1 join(s), 0 leave(s) Multicast routing on this interface: Enabled Robustness: 2 Require-router-alert: Disabled Fast-leave: Disabled SSM-mapping: Disabled Startup-query: Off Other-querier-present-timer-expiry (hh:mm:ss): --:--:-IGMP proxy interface: None IGMP groups reported in total: 1 Table 17 Command output Field Vlan-interface1(10.10.1.20) Query interval for IGMP Description Interface (IP address). IGMP general query interval, in seconds. 46