HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 128
router-aging-time (MLD-snooping view), source-deny (MLD-snooping view
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
router-aging-time (MLD-snooping view) Use router-aging-time to set the global aging timer for dynamic router ports. Use undo router-aging-time to restore the default. Syntax router-aging-time interval undo router-aging-time Default The default setting is 260 seconds. Views MLD-snooping view Predefined user roles network-admin Parameters interval: Specifies an aging timer (in seconds) for dynamic router ports, in the range of 1 to 1000. Usage guidelines The global configuration is effective on all VLANs, but has a lower priority than the configuration made in a specific VLAN. Examples # Set the global aging timer for dynamic router ports to 100 seconds. system-view [Sysname] mld-snooping [Sysname-mld-snooping] router-aging-time 100 Related commands mld-snooping router-aging-time source-deny (MLD-snooping view) Use source-deny to enable IPv6 multicast source port filtering on a specified port to filter out all the received IPv6 multicast data packets. This allows the port to connect to only IPv6 multicast receivers rather than to IPv6 multicast sources. Use undo source-deny to disable IPv6 multicast source port filtering. Syntax source-deny port interface-list undo source-deny port interface-list Default IPv6 multicast source port filtering is disabled on a port, and the port can connect to both IPv6 multicast sources and IPv6 multicast receivers. 122