HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 100
timer join-prune (PIM view
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Examples # Set the global interval for sending hello messages to 40 seconds. system-view [Sysname] pim [Sysname-pim] timer hello 40 Related commands pim timer hello timer join-prune (PIM view) Use timer join-prune to set the global interval for sending join/prune messages. Use undo timer join-prune to restore the default. Syntax timer join-prune interval undo timer join-prune Default The global interval for sending join/prune messages is 60 seconds. Views PIM view Predefined user roles network-admin Parameters interval: Sets the interval (in seconds) for sending join/prune messages, in the range of 0 to 18000. A value of 0 means that no join or prune messages are sent. Usage guidelines You can set the interval for sending join/prune messages in PIM view or interface view. The configurations made in PIM view are effective on all interfaces, and the configurations made in interface view are effective on only the current interface. If you set the interval in both PIM view and interface view, the configuration in interface view always takes precedence. Examples # Set the global interval for sending join/prune messages to 80 seconds. system-view [Sysname] pim [Sysname-pim] timer join-prune 80 Related commands pim timer join-prune 94