HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 43
display multicast rpf-info
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
display multicast rpf-info Use display multicast rpf-info to display the RPF information of a multicast source. Syntax display multicast rpf-info source-address [ group-address ] Views Any view Predefined user roles network-admin network-operator Parameters source-address: Specifies a multicast source address. group-address: Specifies a multicast group address, in the range of 224.0.1.0 to 239.255.255.255. Examples # Display the RPF information of multicast source 192.168.1.55. display multicast rpf-info 192.168.1.55 RPF information about source 192.168.1.55: RPF interface: Vlan-interface1, RPF neighbor: 10.1.1.1 Referenced route/mask: 192.168.1.0/24 Referenced route type: igp Route selection rule: preference-preferred Load splitting rule: disable Table 15 Command output Field RPF neighbor Referenced route/mask Referenced route type Route selection rule Load splitting rule Description IP address of the RPF neighbor. Referenced route and its mask length. Type of the referenced route: • igp-IGP unicast route. • egp-EGP unicast route. • unicast (direct)-Directly connected unicast route. • unicast-Other unicast routes, such as static unicast route. • multicast static-Static multicast route. Rule for RPF route selection, based on the route preference of the routing protocol or based on the longest prefix match to the destination address. Status of the load splitting rule: enabled/disabled. Related commands • display multicast forwarding-table • display multicast routing-table 36