HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 85
pim hello-option neighbor-tracking, Parameters, Usage guidelines, Examples, Related commands, Syntax
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Parameters delay: Sets the prune delay (in milliseconds), in the range of 1 to 32767. Usage guidelines You can set the prune delay in PIM view or interface view. The configurations made in PIM view are effective on all interfaces, and the configurations made in interface view are effective on only the current interface. If you set the prune delay in both PIM view and interface view, the configuration in interface view always takes precedence. Examples # Set the prune delay to 200 milliseconds on VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] pim hello-option lan-delay 200 Related commands • hello-option lan-delay (PIM view) • hello-option override-interval (PIM view) • pim hello-option override-interval pim hello-option neighbor-tracking Use pim hello-option neighbor-tracking to enable the neighbor tracking function on an interface and disable the join message suppression function on that interface. Use pim hello-option neighbor-tracking disable to disable the neighbor tracking function on an interface when the neighbor tracking function is enabled globally. Use undo pim hello-option neighbor-tracking to restore the neighbor tracking function on an interface to be consistent with the global setting. Syntax pim hello-option neighbor-tracking pim hello-option neighbor-tracking disable undo pim hello-option neighbor-tracking Default The neighbor tracking function is disabled and the join message suppression function is enabled. Views Interface view Predefined user roles network-admin Usage guidelines You can enable the neighbor tracking function in PIM view or interface view. The configurations made in PIM view are effective on all interfaces, and the configurations made in interface view are effective on only the current interface. If you enable the neighbor tracking function in both PIM view and interface view, the configuration in interface view always takes precedence. 79