HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 28

igmp-snooping source-deny, igmp-snooping static-group

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

igmp-snooping source-deny Use igmp-snooping source-deny to enable multicast source port filtering on the current port to filter out all the received multicast data packets. This allows the port to connect to only multicast receivers rather than to multicast sources. Use undo igmp-snooping source-deny to disable multicast source port filtering on the current port. Syntax igmp-snooping source-deny undo igmp-snooping source-deny Default Multicast source port filtering is disabled, and the port can connect to both multicast sources and multicast receivers. Views Ethernet interface view Predefined user roles network-admin Usage guidelines This configuration is only effective on the current port, and has the same configuration priority as the global configuration. Examples # Enable source port filtering for multicast data on Ten-GigabitEthernet 1/1/5. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] igmp-snooping source-deny Related commands source-deny (IGMP-snooping view) igmp-snooping static-group Use igmp-snooping static-group to configure a port as a static member port of the specified multicast group or the specified multicast source and group. Use undo igmp-snooping static-group to restore the default. Syntax igmp-snooping static-group group-address [ source-ip source-address ] vlan vlan-id undo igmp-snooping static-group group-address [ source-ip source-address ] { all | vlan vlan-id } Default A port is not a static member port of any multicast group or multicast source and group. Views Ethernet interface view, aggregate interface view 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
21
igmp-snooping source-deny
Use
igmp-snooping source-deny
to enable multicast source port filtering on the current port to filter out all
the received multicast data packets. This allows the port to connect to only multicast receivers rather than
to multicast sources.
Use
undo igmp-snooping source-deny
to disable multicast source port filtering on the current port.
Syntax
igmp-snooping source-deny
undo igmp-snooping source-deny
Default
Multicast source port filtering is disabled, and the port can connect to both multicast sources and
multicast receivers.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
This configuration is only effective on the current port, and has the same configuration priority as the
global configuration.
Examples
# Enable source port filtering for multicast data on Ten-GigabitEthernet 1/1/5.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] igmp-snooping source-deny
Related commands
source-deny
(IGMP-snooping view)
igmp-snooping static-group
Use
igmp-snooping static-group
to configure a port as a static member port of the specified multicast
group or the specified multicast source and group.
Use
undo igmp-snooping static-group
to restore the default.
Syntax
igmp-snooping static-group
group-address
[
source-ip
source-address
]
vlan
vlan-id
undo igmp-snooping static-group
group-address
[
source-ip
source-address
] {
all
|
vlan
vlan-id
}
Default
A port is not a static member port of any multicast group or multicast source and group.
Views
Ethernet interface view, aggregate interface view