HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 26
igmp-snooping overflow-replace, Examples, Related commands, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
The configuration made in VLAN view is only effective on the current VLAN and takes preference over the global configuration. Examples # Enable IGMP snooping for VLAN 2 and set the maximum response time for IGMP general queries to 5 seconds. system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] igmp-snooping enable [Sysname-vlan2] igmp-snooping max-response-time 5 Related commands • igmp-snooping enable • max-response-time (IGMP-snooping view) igmp-snooping overflow-replace Use igmp-snooping overflow-replace to enable the multicast group replacement function on a port. Use undo igmp-snooping overflow-replace to disable the multicast group replacement function on a port. Syntax igmp-snooping overflow-replace [ vlan vlan-list ] undo igmp-snooping overflow-replace [ vlan vlan-list ] Default The multicast group replacement function is disabled. Views Ethernet interface view, aggregate interface view Predefined user roles network-admin Parameters vlan vlan-list: Specifies a space-separated list of up to ten VLAN items. Each item specifies a VLAN by its ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to 4094. If this option is not specified, this command takes effect for all VLANs. Usage guidelines This command is effective for the multicast groups that a port joins dynamically. If you configure the port as a static member port for a multicast group, this command is not effective for the multicast group. The configuration made in proper interface view is only effective on the current port and takes preference over the global configuration. Examples # Enable the multicast group replacement function on Ten-GigabitEthernet 1/1/5 in VLAN 2. system-view 19