HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 95
spt-switch-threshold (PIM view
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Predefined user roles network-admin Parameters acl-number: Specifies an IPv4 basic or advanced ACL, in the range of 2000 to 3999. Usage guidelines Use an IPv4 basic ACL to filter multicast traffic based on its source IP address. Use an IPv4 advanced ACL to filter multicast traffic based on its source address and multicast group addresses. If you specify a VPN instance in the ACL, the ACL does not take effect. Other optional parameters except the fragment keyword and the time-range keyword are ignored. If you execute this command multiple times, the most recent configuration takes effect. Examples # Configure a multicast data filter to accept the multicast packets from the multicast source 10.10.1.2 and discard the multicast packets from the multicast source 10.10.1.1. system-view [Sysname] acl number 2000 [Sysname-acl-basic-2000] rule permit source 10.10.1.2 0 [Sysname-acl-basic-2000] rule deny source 10.10.1.1 0 [Sysname-acl-basic-2000] quit [Sysname] pim [Sysname-pim] source-policy 2000 spt-switch-threshold (PIM view) Use spt-switch-threshold to configure the criteria for triggering a switchover to SPT. Use undo spt-switch-threshold to restore the default. Syntax spt-switch-threshold { immediacy | infinity } [ group-policy acl-number ] undo spt-switch-threshold [ immediacy | infinity ] [ group-policy acl-number ] Default The device immediately triggers a switchover to SPT after receiving the first multicast packet. Views PIM view Predefined user roles network-admin Parameters immediacy: Triggers a switchover to SPT immediately. infinity: Disables switchover to SPT. group-policy acl-number: Specifies an IPv4 basic ACL, in the range of 2000 to 2999. If you specify an IPv4 basic ACL, the configuration applies to the multicast groups that the ACL permits. If you do not specify any IPv4 basic ACL, or if you specify an ACL that does not exist or does not contain any valid rules, the configuration applies to all multicast groups. 89