HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 24
igmp-snooping last-member-query-interval
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Syntax igmp-snooping host-aging-time interval undo igmp-snooping host-aging-time Default The default setting is 260 seconds. Views VLAN view Predefined user roles network-admin Parameters interval: Sets an aging timer (in seconds) for the dynamic member ports in a VLAN, in the range of 200 to 1000. Usage guidelines You must enable IGMP snooping for a VLAN before you configure this command for the VLAN. The configuration made in VLAN view is only effective on the current VLAN and takes preference over the global configuration. Examples # Enable IGMP snooping for VLAN 2 and set the aging timer for the dynamic member ports in the VLAN to 300 seconds. system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] igmp-snooping enable [Sysname-vlan2] igmp-snooping host-aging-time 300 Related commands • host-aging-time (IGMP-snooping view) • igmp-snooping enable igmp-snooping last-member-query-interval Use igmp-snooping last-member-query-interval to set the IGMP last-member query interval for a VLAN. Use undo igmp-snooping last-member-query-interval to restore the default. Syntax igmp-snooping last-member-query-interval interval undo igmp-snooping last-member-query-interval Default The default setting is 1 second. Views VLAN view 17