HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 66
Syntax, Views, Predefined user roles, Parameters, Examples, Table 19, Command output
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Syntax display pim claimed-route [ source-address ] Views Any view Predefined user roles network-admin network-operator Parameters source-address: Specifies a multicast source by its IP address. If no multicast source is specified, this command displays information about all routes that PIM uses. Examples # Display information about all routes that PIM uses. display pim claimed-route RPF-route selecting rule: longest-match Route/mask: 7.11.0.0/16 (unicast (direct)) RPF interface: Vlan-interface2, RPF neighbor: 8.0.0.2 Total number of (S,G) or (*,G) dependent on this route entry: 4 (7.11.0.10, 225.1.1.1) (7.11.0.10, 226.1.1.1) (7.11.0.10, 227.1.1.1) (*, 228.1.1.1) Route/mask: 7.12.0.0/16 (multicast static) RPF interface: Vlan-interface2, RPF neighbor: 8.0.0.3, Config NextHop: 8.0.0.5 Total number of (S,G) or (*,G) dependent on this route entry: 2 (7.12.0.10, 226.1.1.1) (7.12.0.10, 225.1.1.1) Table 19 Command output Field Description Route/mask Route entry. Route types in parentheses include: • igp-IGP unicast route. • egp-EGP unicast route. • unicast (direct)-Direct unicast route. • unicast-Other unicast route, such as static unicast route. • multicast static-Static multicast route. RPF interface Name of the RPF interface. RPF neighbor IP address of the RPF neighbor. Config NextHop Address of the configured next hop. This field is displayed only when the static multicast route is configured with a next hop. Total number of (S,G) or (*,G) dependent on Total number (S, G) or (*, G) entries dependent on the RPF this route entry route and their details. 60