HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 89
pim sm, pim state-refresh-capable
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
[Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] pim require-genid pim sm Use pim sm to enable PIM-SM. Use undo pim sm to disable PIM-SM. Syntax pim sm undo pim sm Default PIM-SM is disabled. Views Interface view Predefined user roles network-admin Usage guidelines This command takes effect only after you enable IP multicast routing on the device. Examples # Enable IP multicast routing, and enable PIM-SM on VLAN-interface 100. system-view [Sysname] multicast routing-enable [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] pim sm Related commands multicast routing-enable pim state-refresh-capable Use pim state-refresh-capable to enable the state refresh feature on the interface. Use undo pim state-refresh-capable to disable the state refresh feature. Syntax pim state-refresh-capable undo pim state-refresh-capable Default The state refresh feature is enabled. Views Interface view 83