HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 156
display ipv6 pim c-rp, Views, Predefined user roles, Parameters, Examples, Syntax
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Views Any view Predefined user roles network-admin network-operator Parameters ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If no IPv6 multicast source is specified, this command displays information about all routes that IPv6 PIM uses. Examples # Display information about all routes that IPv6 PIM uses. display ipv6 pim claimed-route RPF-route selecting rule: longest-match Route/mask: 7:11::/64 (unicast (direct)) RPF interface: Vlan-interface2, RPF neighbor: 8::2 Total number of (S,G) or (*,G) dependent on this route entry: 4 (7:11::10, ff1e::1) (7:11::10, ff1e::2) (7:11::10, ff1e::3) (*, ff1e::4) Route/mask: 7:12::/64 (unicast) RPF interface: Vlan-interface2, RPF neighbor: 8::3, Total number of (S,G) or (*,G) dependent on this route entry: 2 (7:12::10, ff1e::1) (7:12::10, ff1e::2) Table 42 Command output Field Description Route/mask Route entry. Route types in parentheses include: • igp-IGP unicast route. • egp-EGP unicast route. • unicast (direct)-Directly connected unicast route. • unicast-Other unicast route, such as static unicast route. RPF interface Name of the RPF interface. RPF neighbor IPv6 address of the RPF neighbor. Total number of (S,G) or (*,G) dependent on Total number (S, G) or (*, G) entries dependent on the RPF this route entry route and their details. display ipv6 pim c-rp Use display ipv6 pim c-rp to display C-RP information in the IPv6 PIM-SM domain. Syntax display ipv6 pim c-rp [ local ] 150