HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 174
ipv6 pim hello-option lan-delay
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Use undo ipv6 pim hello-option holdtime to restore the default. Syntax ipv6 pim hello-option holdtime time undo ipv6 pim hello-option holdtime Default The IPv6 PIM neighbor lifetime is 105 seconds. Views Interface view Predefined user roles network-admin Parameters time: Sets the IPv6 PIM neighbor lifetime (in seconds), in the range of 1 to 65535. A value of 65535 means that the IPv6 PIM neighbor is always reachable. Usage guidelines You can set the IPv6 PIM neighbor lifetime in IPv6 PIM view or interface view. The configurations made in IPv6 PIM view are effective on all interfaces, and the configurations made in interface view are effective on only the current interface. If you set the IPv6 PIM neighbor lifetime in both IPv6 PIM view and interface view, the configuration in interface view always takes precedence. Examples # Sets the IPv6 PIM neighbor lifetime to 120 seconds on VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] ipv6 pim hello-option holdtime 120 Related commands hello-option holdtime (IPv6 PIM view) ipv6 pim hello-option lan-delay Use ipv6 pim hello-option lan-delay to set the prune delay on an interface. Use undo ipv6 pim hello-option lan-delay to restore the default. Syntax ipv6 pim hello-option lan-delay delay undo ipv6 pim hello-option lan-delay Default The prune delay is 500 milliseconds. Views Interface view Predefined user roles network-admin 168