HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 122
mld-snooping source-deny
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Use undo mld-snooping router-aging-time to restore the default. Syntax mld-snooping router-aging-time interval undo mld-snooping router-aging-time Default The default setting is 260 seconds. Views VLAN view Predefined user roles network-admin Parameters interval: Sets an aging timer (in seconds) for the dynamic router ports in a VLAN, in the range of 1 to 1000. Usage guidelines You must enable MLD snooping for a VLAN before you configure this command for the VLAN. The configuration made in VLAN view is only effective on the current VLAN and takes preference over the global configuration. Examples # Enable MLD snooping for VLAN 2 and set the aging timer for the dynamic router ports in the VLAN to 100 seconds. system-view [Sysname] mld-snooping [Sysname-mld-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] mld-snooping enable [Sysname-vlan2] mld-snooping router-aging-time 100 Related commands • mld-snooping enable • router-aging-time (MLD-snooping view) mld-snooping source-deny Use mld-snooping source-deny to enable IPv6 multicast source port filtering on the current port to filter out all the received IPv6 multicast data packets. This allows the port to connect to only IPv6 multicast receivers rather than to IPv6 multicast sources. Use undo mld-snooping source-deny to disable IPv6 multicast source port filtering on the current port. Syntax mld-snooping source-deny undo mld-snooping source-deny 116