HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 58
reset igmp group, Views, Predefined user roles, Parameters, Examples, Syntax, Usage guidelines
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Views Interface view Predefined user roles network-admin Parameters version-number: Specifies an IGMP version, in the range of 1 to 3. Examples # Specify IGMPv1 for VLAN-interface 100. system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] igmp version 1 reset igmp group Use reset igmp group to remove dynamic IGMP group entries. Syntax reset igmp group { all | interface interface-type interface-number { all | group-address [ mask { mask | mask-length } ] [ source-address [ mask { mask | mask-length } ] ] } } Views User view Predefined user roles network-admin Parameters all: Specifies all interfaces (the first all), or all multicast groups (the second all). interface-type interface-number: Specifies an interface by its type and number. group-address: Specifies a multicast group by its address, in the range of 224.0.0.0 to 239.255.255.255. source-address: Specifies a multicast source address. If this argument is not specified, the command removes dynamic IGMP group entries of all multicast source addresses. mask: Specifies the mask. The default is 255.255.255.255. mask-length: Specifies the address mask length. The default value is 32. For a multicast group address, the value range for this argument is 4 to 32. For a multicast source address, the value range for this argument is 0 to 32. Usage guidelines This command cannot remove static IGMP group entries. Execution of this command might interrupt the multicast information transmission. Examples # Remove the dynamic group entries for all IGMP groups on all interfaces. reset igmp group all # Remove the dynamic group entries for all IGMP groups on VLAN-interface 100. 51