HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 124
mld-snooping static-router-port
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Usage guidelines The source-ip ipv6-source-address option is meaningful only for MLDv2 snooping. If MLDv1 snooping is running, the source-ip ipv6-source-address option does not take effect although you can include source-ip ipv6-source-address in the command. Examples # Configure Ten-GigabitEthernet 1/1/5 in VLAN 2 as a static member port for the IPv6 multicast source and group (2002::22, FF3E::101). system-view [Sysname] mld-snooping [Sysname-mld-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] mld-snooping enable [Sysname-vlan2] mld-snooping version 2 [Sysname-vlan2] quit [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] mld-snooping static-group ff3e::101 source-ip 2002::22 vlan 2 mld-snooping static-router-port Use mld-snooping static-router-port to configure a port as a static router port. Use undo mld-snooping static-router-port to restore the default. Syntax mld-snooping static-router-port vlan vlan-id undo mld-snooping static-router-port { all | vlan vlan-id } Default A port is not a static router port. Views Ethernet interface view, aggregate interface view Predefined user roles network-admin Parameters all: Specifies all VLANs. vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. Examples # Configure Ten-GigabitEthernet 1/1/5 in VLAN 2 as a static router port. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] mld-snooping static-router-port vlan 2 118